Ingersoll-Rand President Uber Dies

January 6, 2015

R. Barry Uber, one-time president of Ingersoll-Rand's Construction and Mining division, died December 31, 2014, at Springfield Hospital in Springfield, Vermont. He was 69.

Uber served for 30 years at Ingersoll-Rand. For the past ten years, he had been a private equity investor.

Uber is survived by his wife of 20 years, Kathleen M. Lawlor Uber, two daughters, and three step daughters.

In lieu of flowers, contributions in his memory may be made to Student Emergency Support Fund (XC6SE) at Penn State Harrisburg. Contributions can be sent to The Office of Development, Penn State Harrisburg, 777 West Harrisburg Pike, Olmsted W110, Middletown, PA 17057 or online by visiting http://giveto.psu.edu and entering XC6SE in the box marked other.

2022 Contractors Top 50 New Products Award 63f589c68dad5

Nominations Now Open for the Equipment Today Contractors’ Top 50 New Products

The 2024 award will highlight the best new product introductions and enhancements in the construction industry. Submissions close May 24.

Jobs that can rack up 10,000 hours on a diesel machine might add 6,000 hours or 7,000 hours to a comparable electric machine.

Challenges & Benefits of Moving to Electric Equipment

As emission regulations tighten, construction equipment power sources will evolve, but adoption will be gradual.

Inspired by You, Designed for the Job | JLG®

Inspired by You, Designed for the Job | JLG®

Every job is a new way to leave your mark on tomorrow. Don’t settle for anything less than a partner who shares your drive to do your best work.

The BOSSAIR 185G features the BOSS BCAN Digital Interface, which uses the J1939 electronic connection in vehicles to communicate between the vehicle and air compressor and power systems.

BOSS Industries BOSSAIR 185G Air Compressor Package

The BOSSAIR 185G features the BOSS BCAN Digital Interface, which uses the J1939 electronic connection in vehicles to communicate between the vehicle and air compressor and power systems.

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

OTR to Open Factory in Mexico

Located in Apodaca, a city in the Monterrey metropolitan area, the site was strategically selected to supply OEM customers with products and services such as tire mounting, sequencing, just-in-time supply and warehousing on a local basis.

New SealMaster Santa Ana Storefront Distribution

SealMaster Continues Western Expansion

SealMaster acquires Martin Marietta Miramar sealcoat manufacturing plant.

The new facility, focused on high complexity and high variation specialty fifth wheel manufacturing, will include the current SAF-HOLLAND Wylie, Texas operation.

SAF-HOLLAND to Build New Factory in Texas

The new Rowlett facility is the next phase of the SAF-HOLLAND manufacturing optimization and vertical integration strategy to increase capacity output that began with the opening of its Piedras Negras, Coahuila, Mexico plant in August 2023.

Skf Lincoln Gear Oil Dispensing Units

SKF Lincoln Unveils Mityvac Gear Oil Dispensing Units

The gear oil handling systems utilize compressed air for clean fluid handling.

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

DENIOS Launches BatterySafe Cases for Lithium-ion Batteries

During storage, lithium-ion batteries are surrounded by cushions filled with Pyrobubbles - an extinguishing agent which provides protection against thermal runaway and exothermic reactions.

Volvo Ce Pioneers E Shuttle Service To Cut Transport Emissions 660d7bf383081

Volvo Construction Testing Out Excavator Delivery in France With E-shuttle

The e-shuttle service is designed to reduce emissions during the first transport leg of construction machines from the Volvo CE factory in France.

FIRSTGREEN Industries launches ROCKEAT electric skid steer loader, pioneering powerful, safe and zero-emissions solution for mining, construction and other hazardous industries.

New Electric Skid Steer Loader by First Green

ROCKEAT produces zero carbon emissions, minimum operating fluids and near-silent operation, and offers a low clearance, 360-degree camera and remote operability.

2521 10 F

Milwaukee Introduces M12 FUEL Circular Saw

The Milwaukee M12 FUEL Circular Saw is designed for cross-cutting sheet goods and dimensional lumber.

The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.

XCMG Launches G2 Cranes

The G2 platform integrates the process of product application, maintenance, operation and management, including 21 core technologies and 31 spare parts.

The new engine platform will be equipped with Cat Digital Services, an integrated suite of software and hardware solutions supplying the insight equipment owners need to make decisions and secure the health of their equipment.

Caterpillar Announces 13L C13D Diesel Engine for 2026

The new engine platform offers up to a 20% increase in power and up to 25% more low-speed torque than the previous generation of Cat engines in its power class.

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Milwaukee Launches M12 Brushless Copper Tubing Cutter

The Milwaukee M12 Brushless Copper Tubing Cutter automatically adjusts diameter to cut Type K, L and M copper pipes from 1.375 to 2.125 in. (OD).

Road base is typically introduced after the subgrade has been prepared and compacted to a stable and level surface.

What Is Road Base?

Going back to basics, this article details the importance of the correct road base in the durability and life of roads.

The new products include the 20V MAX* Hydraulic Knockout Tool (DCE600), 20V MAX* XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX* XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

DEWALT Releases 20V MAX Knockout Tool and Bandsaws

The new products include the 20V MAX Hydraulic Knockout Tool (DCE600), 20V MAX XR Brushless Cordless Mid-Size Bandsaw (DCS378) and 20V MAX XR Brushless Cordless Dual-Trigger Bandsaw (DCS379).

Specific details regarding the actual price change will be communicated directly to customers by Trelleborg tires representatives in each market.

Trelleborg Tires to Implement Price Increases

Trelleborg tires will increase prices globally by up to 5% across all segments.

Forklift

TPPL vs Lithium Forklift Batteries: Which Technology is Winning?

As technology changes - and presumably improves - how does TPPL technology compare to lithium-ion?

Tm2

All Access Equipment Track Lift Truck Mount and Transport Deck

The solution provides a safe way to enter an aerial work platform without the need to climb up and down the top of a truck with unprotected cab guards.

The products include an Adjustable Tri-Ball Hitch for 2-in. Hitch Receivers, a 12-ton Receiver Mount Pintle Hook and a pair of Class 5 Service Body Hitch Receivers.

Buyers Products Offers Towing Solutions

The products include an Adjustable Tri-Ball Hitch for 2-in. Hitch Receivers, a 12-ton Receiver Mount Pintle Hook and a pair of Class 5 Service Body Hitch Receivers.

Understand the choices available to take the “hard” out of work on your dozers, excavators, motor graders, wheel loaders and compactors.

Take the 'Hard' Out of Work

June 13, 2024

Learn the top four advantages of ease-of-use technology from this webinar.

Burds accepts the overall winner trophy.

Caterpillar Competition Winner Talks About the Industry & Her Win

Kait Burds with Mortenson loves the industry and wants to see more women join.

The StrikeSmart PLUS controller works in conjunction with Hilltip’s TempStriker sensor, which continually monitors variables like temperature, humidity and surface conditions.

Hilltip Launches StrikeSmart PLUS Controller

The StrikeSmart PLUS controller works in conjunction with Hilltip’s TempStriker sensor, which continually monitors variables like temperature, humidity and surface conditions.

The team at the John Deere booth focused on earthmoving equipment.

The 2024 Equipment Showcase & the ARA Show

Check out recent product highlights and ARA show trends.

Adobe Stock 679258598 Gorodenkoff

3 Tactics to Boost Construction Fleet Performance

Telematics, IoT devices, and even AI integrations have the power to significantly improve construction fleet management when utilized effectively.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Fact or fiction? Debunking 3 myths about pump-free fluid exchanges.

Pump-free fluid exchange systems are cleaner, safer, faster and sometimes misunderstood. Bust three pump-free myths with Sage Oil Vac.