@ MISTRkS
One Source for Asset Protection Solutions
EXPRESS-8 l An Eight-Channel Acoustic Emission Board & SystemPCI-EXPRESS BUS BASED,AE BOARO
EXPRESS-8 represents an advanced update of our well-known DiSP and PCI-8 boards. The addition of the PCI-Express bus re sults in an increase in maximum sustained processing speed over its predecessors and ensures the maintaining of performance levels with potential stem expansion. That addsup to better stem performance and reliability.
KEY FEATURES
• High-performance PCI-Expre ss bus allows for greater data streaming speed
• Halfthe size ofpreviousmodels, allowing for greater channel density in chassis
• High channel densi tv (8 channels)
• Waveformsand Waveform Streaming included
• More than 500 selectable digitai filters for sharp cutoffs and lower noise
• Compatible with ali MISTRAS preamplifiers
• EXPRESS-8 chassis- Micro-II-Express(32 channels) and Benchtop (96 channels)
• Optional chassi s expansion interface
• lmproved digitai filers, larger hit buffer, larger waveform FIFO buffer
• Sensor input: PK sensor, low power phantom
power +SV, or RXXI and preamplifier, traditional phantom power (+28V) or
24v ICP Sensor
THE SYSTEM CHASSIS
The use of the PCI-Express bus with the EXPRESS-8 card can use one of two PCI-Express AE stem chassis. The board also works in a standard PC with PCie slots.
The Micro-11-Expre ss chassis is the same size as MISTRAS' ultra-portable Micro-11 SAMOS chassis. This chassis can hold up four EXPRESS-8's, which translates into 32 AE channels in a rugged, mobile case. The Benchtop stem's channel density extends to 96 (12 EXPRESS-8 boards). Customerscan even connect two or more chassis with optional stem nchronization interface.
The EXPRESS-s stem and its corresponding chassis ( Micro-11-Express and Benchtop) represent the pinnacle in MISTRAS' high-speed, high channel density multichannel AE stems, while also offering the best value. The EXPRESS-s is ideai for large-structure monitoring and field testing where portability, high-channel density, and fast performance are required.
SPECIFICATIONS:
Physicai/Environmental
Size ..........6.5"x 4.2x 0.70(16.5cmx 10.7x 1.8) Weight.........................................0.21bs.(0.1kg)
Operating temp..................32•- 120•F (O•- so•q
Electricaloperation
Voltage Required.......................... 3.3V,3.3V aux,
............................................12V from connector Current oonsumption .............................3.3V<1A Total consumption............<10W without sensors
Analog signalprocessing
AE lnput Connector .................8 SMB connectors
Bandwidth.................................1kHz to 1.2 MHz
Digitaisignalprocessing
A/D conversian rate.....................16 bit,10 MSPS Digitai processing .... 18bit256 tap digitai FIR n1ter Waveform storage...15,000 samples each channel Data streaming.......Continuous waveform to disk
Parametries
Analog inputs ......................................8 channels lnput range...........±10V channels on ali channels Resolution .................................................16 bits Maximum sample rate ....10 kSPS (ali 8 channels) Digitai IO...........8 digitai inputs,8 digitai outputs Analog output.......................Four 0-10v outputs
WORLDWIDE HEADQUARTERS:
195 ClarkSville Rd •
Princeton Jet.NJ 08550 ·USA
T: +1.609.716.4000 • F: +1.609.716.0706
E-MAlL: sales@mistrasgroup.com
Visit our website for an office near you
www.mistrasgroup.comSpeciftcations subject to charge without notice. Copyright © 2013 MISTRAS Group,lne.Ali Rights Reserved.#200A-13106.Q2 www.mistrasgroup.corn
distributed by |