SMD G.fast Transformers offer target speeds up to 1 Gbps.

Press Release Summary:




BX4500LNL and BX4500LNLT enable Broadcom chipsets to deliver high-speed broadband access for broadcast-quality, multi-stream IPTV, voice, data, and home networking. These 8 x 8 x 10 mm functional isolation transformers can be matched with Microsemi line driver and used with Broadcom BCM652xx DSP and BCM659xx AFE chipsets for G.fast transmission (Le87282). Operating bandwidth is 2–100 MHz, with target speeds up to 1 Gbps to consumer residences, and leakage inductance is <0.4 µH.



Original Press Release:



Pulse Electronics Introduces G.fast Transformers for Use with Broadcom's Chipsets



Have an operating bandwidth of 2 to 100 MHz and target speeds up to 1 Gbps



San Diego, Calif. -- Pulse Electronics Corporation, a leading provider of electronic components, introduces its new family of G.fast functional isolation transformers. Pulse's BX4500LNL and BX4500LNLT transformers can be matched with a Microsemi line driver and used with Broadcom's BCM652xx DSP and BCM659xx AFE chipsets for G.fast transmission, Le87282. Operating bandwidth is 2 MHz to 100 MHz with target speeds up to 1 Gbps to consumer residences. These transformers enable Broadcom's chipsets to deliver high-speed broadband access for broadcast quality multi-stream IPTV, voice, data, and home networking.



The G.fast transformers are built on a very small platform of 8mm x 8mm x 10mm (length x width x height) with a low leakage inductance of less than 0.4 µH. G.fast is the newly approved ultra-broadband DSL standard from the ITU for local loops shorter than 500 meters and is expected to deliver up to 1 Gbps to consumer residences, ITU-T G.9701.



"These transformers have improved longitudinal balance and provide excellent total harmonic distortion performance on a very compact platform," explained Ronan Kelly, product marketing manager, Pulse Electronics. "The G.fast series supports Broadcom's chipset technology to drive data rates up to 150 Mbps/downstream and 100 Mbps/upstream on a single line."



Pulse Electronics' BX4500LNL transformer is packaged in trays while the BX4500LNLT is packaged in tape and reel. They are EN60950 functional isolation compliant 250Vrms and RoHS-6 compliant SMD products. The G.fast transformers are available now with a lead-time of 8 weeks. Evaluation samples are available immediately. More information can be found on the datasheet located on the Pulse website at http://productfinder.pulseeng.com/products/datasheets/T709.pdf, or by contacting Pulse at info@pulseelectronics.com or visiting the Pulse Electronics website at www.pulseelectronics.com.



About Pulse Electronics:

Pulse Electronics is an electronic components partner that helps customers build the next great product by providing the needed technical solutions. Pulse Electronics has a long operating history of innovation in magnetics, antennas, and connectors, as well as the ability to ramp quickly into high-quality, high-volume production. The Company serves the wireless and wireline communications, power management, military/aerospace, and automotive industries. Pulse Electronics is a participating member of the IEEE, SFF, OIF, HDBaseT Alliance, CommNexus, NFC Forum, MoCA, and IWPC. Visit the Pulse Electronics website at www.pulseelectronics.com.



Copyright ©2015 Pulse Electronics Corporation. All rights reserved. All brand names and trademarks are properties of their respective holders.



Pulse Electronics

Ronan Kelly

Product Marketing Manager

Pulse Electronics

Cell: +353 93 70334

E-mail: rkelly@pulseelectronics.com



A R Marketing Inc. (agency)

Andrea Roberts

Tel: +1 858-204-9584 mobile

Email: andrea@armarketinginc.com

All Topics