Anzeige
Mehr »
Login
Donnerstag, 25.04.2024 Börsentäglich über 12.000 News von 687 internationalen Medien
Wie die Revolution der sauberen Energie eine solide Investitionsmöglichkeit bieten könnte
Anzeige

Indizes

Kurs

%
News
24 h / 7 T
Aufrufe
7 Tage

Aktien

Kurs

%
News
24 h / 7 T
Aufrufe
7 Tage

Xetra-Orderbuch

Fonds

Kurs

%

Devisen

Kurs

%

Rohstoffe

Kurs

%

Themen

Kurs

%

Erweiterte Suche
Dow Jones News
118 Leser
Artikel bewerten:
(0)

EQS-News: SMIC Achieves 8M Pixel CIS Production on 0.13-Micron BSI with Cista

(EQS-News / 27/02/2015 / 18:00 UTC+8) 
 
SMIC Achieves 8M Pixel CIS Production on 0.13-Micron BSI with Cista 
 
SHANGHAI, Feb. 27, 2015 /PRNewswire/ -- Semiconductor Manufacturing 
International Corporation ("SMIC") (NYSE: SMI; SEHK: 981) the largest and 
most advanced pure-play foundry provider in China, and Cista System Corp. a 
fabless semiconductor company that specializes in CMOS Image Sensors (CIS) 
and System on Chip (SoC) designs, have jointly announced the achievement of 
mass production for two CIS-BSI products, of 1.3MP resolution with 
1.75-micron pixel and 8MP resolution with 1.4-micron pixel, respectively. 
Both sensors are based on SMIC's independently developed 0.13-micron BSI 
technology platform. 
 
Back-Side Illumination (BSI) CMOS Image Sensor technology increases the 
amount of light captured by the sensor, and thus enables image sensors with 
improved low-light performance. SMIC's 0.13-micron CIS-BSI technology is 
independently developed and offers competitive performance. Based on a low 
leakage process, it only uses three aluminum metal layers for reduced cost 
and supports pixel sizes down to 1.4-micronfor 8MP resolution CIS. SMIC 
also provides full in-house turn-key service which includes CIS wafer 
fabrication, color filter & micro-lens processing, TSV-CSP and testing to 
help customers shorten the supply chain with fast cycle time and low cost. 
 
"Through working with our partner, Cista System Corp., we are very pleased 
with the achievement of the production phase for BSI technology," said Dr. 
Shiuh-Wuu Lee, Executive Vice President of Technology Development of SMIC. 
"Tests on the two sensors have shown great performance which demonstrates 
our readiness in 0.13-micron BSI technology platform. SMIC is also 
developing 1.1-micron pixel BSI for 13MP resolution and above, and 3D 
stacked BSI for high-end applications. With these new sets of products, we 
hope to provide high-quality CMOS Image Sensors to our customers at a 
competitive price." 
 
"We are excited to partner with SMIC on launching the CIS-BSI sensors," 
said Wilson Du, CEO and President of Cista System Corp. "This partnership 
draws us one step closer to our goal of becoming more integrated with 
domestic industry resources in developing the image sensor sector. As we 
move forward, we hope to see more of our designs used in wider applications 
such as consumer electronics, telecommunications, medical equipment, 
automotive industry, automation and other applications." 
 
About Cista 
 
Cista System Corp., a Cayman Islands company, is an emerging developer of 
advanced digital imaging solutions. Its leading CMOS imaging technology 
offers superior image quality that can be deployed in many of today's 
consumer electronic products, including mobile phones, notebooks, tablets 
and digital still and video cameras. 
 
Cista Contact Information: 
 
Ann Wang 
Tel: +1-408-3297520 
Email: Wangyian@cistadesign.com 
 
About SMIC 
 
Semiconductor Manufacturing International Corporation ("SMIC"; NYSE: SMI; 
SEHK: 981) is one of the leading semiconductor foundries in the world and 
the largest and most advanced foundry in mainland China. SMIC provides 
integrated circuit (IC) foundry and technology services at 0.35-micron to 
28-nanometer. Headquartered in Shanghai, China, SMIC has a 300mm wafer 
fabrication facility (fab) and a 200mm mega-fab in Shanghai; a 300mm 
mega-fab and a second majority owned 300mm fab under development for 
advance nodes in Beijing; and 200mm fabs in Tianjin and Shenzhen. SMIC also 
has marketing and customer service offices in the U.S., Europe, Japan, and 
Taiwan, and a representative office in Hong Kong. For more information, 
please visit www.smics.com. 
 
Safe Harbor Statements 
 
(Under the Private Securities Litigation Reform Act of 1995) 
 
This document contains, in addition to historical information, 
"forward-looking statements" within the meaning of the "safe harbor" 
provisions of the U.S. Private Securities Litigation Reform Act of 1995. 
These forward-looking statements are based on SMIC's current assumptions, 
expectations and projections about future events. SMIC uses words like 
"believe," "anticipate," "intend," "estimate," "expect," "project" and 
similar expressions to identify forward looking statements, although not 
all forward-looking statements contain these words. These forward-looking 
statements are necessarily estimates reflecting the best judgment of SMIC's 
senior management and involve significant risks, both known and unknown, 
uncertainties and other factors that may cause SMIC's actual performance, 
financial condition or results of operations to be materially different 
from those suggested by the forward-looking statements including, among 
others, risks associated with cyclicality and market conditions in the 
semiconductor industry, intense competition, timely wafer acceptance by 
SMIC's customers, timely introduction of new technologies, SMIC's ability 
to ramp new products into volume, supply and demand for semiconductor 
foundry services, industry overcapacity, shortages in equipment, components 
and raw materials, availability of manufacturing capacity, financial 
stability in end markets and intensive intellectual property litigation in 
high tech industry. 
 
In addition to the information contained in this document, you should also 
consider the information contained in our other filings with the SEC, 
including our annual report on Form 20-F filed with the SEC on April 14, 
2014, especially in the "Risk Factors" section and such other documents 
that we may file with the SEC or SEHK from time to time, including on Form 
6-K. Other unknown or unpredictable factors also could have material 
adverse effects on our future results, performance or achievements. In 
light of these risks, uncertainties, assumptions and factors, the 
forward-looking events discussed in this document may not occur. You are 
cautioned not to place undue reliance on these forward-looking statements, 
which speak only as of the date stated or, if no date is stated, as of the 
date of this document. 
 
SMIC Contact Information: 
 
English Media 
Michael Cheung 
Tel: +86-21-3861-0000 x16812 
Email: Michael_Cheung@smics.com 
 
Chinese Media 
Jane Tang 
Tel: +86-21-3861-0000 x10088 
Email: Jane_Tang@smics.com 
 
 
End of Press Release 
 
+++++ 
 
 
Document: http://n.equitystory.com/c/fncls.ssp?u=RTFDUJGFPJ 
Document title: SMIC Achieves 8M Pixel CIS Production on 0.13-Micron 
BSI with Cista 
 
=-------------------------------------------------------------------- 
 
Key word(s): Product Launch 
 
27/02/2015 UTC+8 Dissemination of a Press Release, transmitted by EQS 
TodayIR - a company of EQS Group AG. 
The issuer is solely responsible for the content of this announcement. 
 
Media archive at www.todayir.com 
 
=-------------------------------------------------------------------- 
 
 
327783 27/02/2015 UTC+8 
 

(END) Dow Jones Newswires

February 27, 2015 05:00 ET (10:00 GMT)

Großer Insider-Report 2024 von Dr. Dennis Riedl
Wenn Insider handeln, sollten Sie aufmerksam werden. In diesem kostenlosen Report erfahren Sie, welche Aktien Sie im Moment im Blick behalten und von welchen Sie lieber die Finger lassen sollten.
Hier klicken
© 2015 Dow Jones News
Werbehinweise: Die Billigung des Basisprospekts durch die BaFin ist nicht als ihre Befürwortung der angebotenen Wertpapiere zu verstehen. Wir empfehlen Interessenten und potenziellen Anlegern den Basisprospekt und die Endgültigen Bedingungen zu lesen, bevor sie eine Anlageentscheidung treffen, um sich möglichst umfassend zu informieren, insbesondere über die potenziellen Risiken und Chancen des Wertpapiers. Sie sind im Begriff, ein Produkt zu erwerben, das nicht einfach ist und schwer zu verstehen sein kann.