Composite brackets for life-of-aircraft service
Reinforced PEEK molding formulated for jet fuel/hydraulic fluid immersion.
Aircraft design and assembly is all about the sometimes competing goals of reducing weight and ensuring flight safety. Northern Ireland-based injection molding specialist Denroy Plastics Ltd. (Bangor, County Down, UK) is meeting both directives with a polyetheretherketone (PEEK)-based composite.
Airframer Bombardier (Montreal, QC, Canada) asked Denroy to replace small- to medium-sized machined aluminum and titanium brackets for wings, center wingbox and fuel-tank applications, intended to last the life of the aircraft despite constant immersion in fuel. Denroy, in close collaboration with its client and Victrex (W. Conshohocken, PA, US), selected the latter’s electrostatically dissipative polymer, trademarked VICTREX PEEK-ESD, which complies with lightning strike requirements, and is resistant to wear and aggressive aerospace fluids. Victrex also formulated the polymer for Denroy using proprietary fillers, which do not break down under shear when passing through the injection gate during the molding process. Thus, parts could be produced under optimum molding conditions without affecting the polymer’s electrostatic discharge properties.
The molded brackets, now specified in Bombardier’s C-Series, Global and Learjet aircraft, weigh 40% less than the metal versions, says Denroy sales/marketing manager Jim Knowles. In addition, manufacturing cost savings were achieved via part consolidation, integration of complex shapes, elimination of secondary machining/painting, and a reduction in scrap rate and cycle time.
Tim Herr, Victrex aerospace strategic business unit director, says Denroy has new polyaryletherketone (PAEK)/ PEEK hybrid molding process for loaded brackets. Read CW’s coverage of that hybrid process online here or click on “Overmolding expands PEEK’s range in composites” under "Editor's Picks" at top right.
Related Content
-
A new era for ceramic matrix composites
CMC is expanding, with new fiber production in Europe, faster processes and higher temperature materials enabling applications for industry, hypersonics and New Space.
-
Novel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.
-
Sulapac introduces Sulapac Flow 1.7 to replace PLA, ABS and PP in FDM, FGF
Available as filament and granules for extrusion, new wood composite matches properties yet is compostable, eliminates microplastics and reduces carbon footprint.