Tool-Less Adjustments

Getting a projector image to perfectly align with a screen is easier said than done. Thankfully this mount simplifies the process with easy-to-use vertical tilt, horizontal roll, and yaw adjustments. Just pop off the cover and use the tool-less dials to make micro-adjustments until the ideal alignment is achieved - no tightening or loosening of the screws required.

Easy To Install

A smart three-piece design makes it easy to get this projector securely installed. The top plate attaches to the ceiling and screws into the mount assembly body, while the bottom plate (with attached projector) simply slides and locks into place.

Great Lock Down Screw System

This mount features multiple security screws for projector attachment, as well as screws on each side of the mounting base - which all help to lock things in place. Move the mount around until you get the perfect center of gravity for the projector, then tighten down the screws and you’re good to go!

Extension Capability

If you want to drop the projector off the ceiling with an extension pole, we've included a separate ceiling plate to allow for easy connection to the pipe. Also included is a plastic cover to keep the install looking neat and tidy. Select from fixed and adjustable extension poles ranging from 3 - 24”. To get the best picture, you should align the top of your projector with the top of your screen. Measure from the ceiling to the top of your screen, and then determine the length of the extension pole needed to ensure the top of your projector is at the same height.

Adjustable or Fixed Extension Poles: If you are not sure of your exact height, choose the adjustable version or if you are, you can save a little with the fixed length.

Warranty

Limited Lifetime — This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified, or disassembled.