Octopus-inspired wearable sensor

Octopus-inspired wearable sensor
A graphene-based adhesive biosensor inspired by octopus "suckers" is flexible and holds up in wet and dry environments. Credit: Adapted from ACS Appl. Mater. Interfaces 2019, 11, 16951 16957

Wearable electronics that adhere to skin are an emerging trend in health sensor technology for their ability to monitor a variety of human activities, from heart rate to step count. But finding the best way to stick a device to the body has been a challenge. Now, a team of researchers reports the development of a graphene-based adhesive biosensor inspired by octopus "suckers." They report their findings in ACS Applied Materials & Interfaces.

For a to be truly effective, it must be flexible and adhere fully to both wet and but still remain comfortable for the user. Thus, the choice of substrate, the material that the sensing compounds rest upon, is crucial. Woven yarn is a popular substrate, but it sometimes doesn't fully contact the skin, especially if that skin is hairy. Typical yarns and threads are also vulnerable to wet environments. Adhesives can lose their grip underwater, and in dry environments they can be so sticky that they can be painful when peeled off. To overcome these challenges, Changhyun Pang, Changsoon Choi and colleagues worked to develop a low-cost, graphene-based sensor with a yarn-like substrate that uses octopus-like suckers to adhere to skin.

The researchers coated an elastic polyurethane and polyester fabric with and soaked in L-ascorbic acid to aid in conductivity while still retaining its strength and stretch. From there, they added a coating of a graphene and poly(dimethylsiloxane) (PDMS) film to form a conductive path from the fabric to the skin. Finally, they etched tiny, octopus-like patterns on the film. The sensor could detect a wide range of pressures and motions in both wet and dry environments. The device also could monitor an array of human activities, including electrocardiogram signals, pulse and , demonstrating its potential use in medical applications, the researchers say.

More information: Sungwoo Chun et al, Water-Resistant and Skin-Adhesive Wearable Electronics Using Graphene Fabric Sensor with Octopus-Inspired Microsuckers, ACS Applied Materials & Interfaces (2019). DOI: 10.1021/acsami.9b04206

Citation: Octopus-inspired wearable sensor (2019, May 22) retrieved 28 March 2024 from https://phys.org/news/2019-05-octopus-inspired-wearable-sensor.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Transparent and flexible battery for power generation and storage

14 shares

Feedback to editors