New nanomaterial can extract hydrogen fuel from seawater

New nanomaterial can extract hydrogen fuel from seawater
Artist's conceptualization of the hybrid nanomaterial photocatalyst that's able to generate solar energy and extract hydrogen gas from seawater. Credit: University of Central Florida

It's possible to produce hydrogen to power fuel cells by extracting the gas from seawater, but the electricity required to do it makes the process costly. UCF researcher Yang Yang has come up with a new hybrid nanomaterial that harnesses solar energy and uses it to generate hydrogen from seawater more cheaply and efficiently than current materials.

The breakthrough could someday lead to a new source of the clean-burning fuel, ease demand for fossil fuels and boost the economy of Florida, where sunshine and seawater are abundant.

Yang, an assistant professor with joint appointments in the University of Central Florida's NanoScience Technology Center and the Department of Materials Science and Engineering, has been working on solar hydrogen splitting for nearly 10 years.

It's done using a - a material that spurs a chemical reaction using from light. When he began his research, Yang focused on using solar energy to extract hydrogen from purified water. It's a much more difficulty task with seawater; the photocatalysts needed aren't durable enough to handle its biomass and corrosive salt.

As reported in the journal Energy & Environmental Science, Yang and his research team have developed a new catalyst that's able to not only harvest a much broader spectrum of light than other , but also stand up to the harsh conditions found in seawater.

"We've opened a new window to splitting real water, not just purified water in a lab," Yang said. "This really works well in seawater."

Yang developed a method of fabricating a photocatalyst composed of a hybrid material. Tiny nanocavities were chemically etched onto the surface of an ultrathin film of titanium dioxide, the most common photocatalyst. Those nanocavity indentations were coated with nanoflakes of molybdenum disulfide, a two-dimensional material with the thickness of a single atom.

Typical catalysts are able to convert only a limited bandwidth of light to energy. With its new material, Yang's team is able to significantly boost the bandwidth of light that can be harvested. By controlling the density of sulfur vacancy within the nanoflakes, they can produce energy from ultraviolet-visible to near-infrared light wavelengths, making it at least twice as efficient as current photocatalysts.

"We can absorb much more solar energy from the than the conventional material," Yang said. "Eventually, if it is commercialized, it would be good for Florida's economy. We have a lot of around Florida and a lot of really good sunshine."

In many situations, producing a chemical fuel from is a better solution than producing electricity from solar panels, he said. That electricity must be used or stored in batteries, which degrade, while is easily stored and transported.

Fabricating the catalyst is relatively easy and inexpensive. Yang's team is continuing its research by focusing on the best way to scale up the fabrication, and further improve its performance so it's possible to split from wastewater.

More information: Limin Guo et al, MoS2/TiO2 Heterostructures as Nonmetal Plasmonic Photocatalysts for Highly Efficient Hydrogen Evolution, Energy Environ. Sci. (2017). DOI: 10.1039/C7EE02464A

Journal information: Energy & Environmental Science

Citation: New nanomaterial can extract hydrogen fuel from seawater (2017, October 4) retrieved 23 April 2024 from https://phys.org/news/2017-10-nanomaterial-hydrogen-fuel-seawater.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

A new way to produce clean hydrogen fuel from water using sunlight

8655 shares

Feedback to editors