Researchers introduce new potential for semiconductors from a naturally occurring mineral

(Nanowerk News) Researchers at Missouri S&T are demonstrating a new two-dimensional material heterostructure – a basic building block for advanced semiconductor devices – that has great potential for future applications in compact sensors and detectors, optical communication, optical integrated circuits and quantum computers.
The researchers found that flakes of lengenbachite, a mineral discovered 100 years ago in Switzerland, have strong anisotropic properties, meaning that the optical responses of the flakes vary along axis lines depending on the orientation. The researchers say that could have implications for directional light-emitting devices, encrypted data transfer and signal processing, and polarization-sensitive photodetectors.
The researchers describe their discovery in npj 2D Materials and Applications ("Naturally occurring van der Waals heterostructure lengenbachite with strong in-plane structural and optical anisotropy").
They obtain ultrathin lengenbachite flakes – around 30 nanometers thick – by mechanically exfoliating the bulk mineral using Nitto PVC tape. Lengenbachite is composed of stacks of alternating, weakly bonded layers of four-atom-thick lead sulfide and five-atom-thick arsenic trisulfide.
a photo of lengenbachite mineral rock and the zoomed-in view of one crystal cluster with several blade-like crystal plates, together with a transmission electron microscopy image displaying the 1D rippling structures
Figure shows a photo of lengenbachite mineral rock and the zoomed-in view of one crystal cluster with several blade-like crystal plates, together with a transmission electron microscopy image displaying the 1D rippling structures and the generated nonlinear green-color imaging of a near-infrared optical vector beam. (Image: Missouri S&T)
Interestingly, the researchers observed out-of-plane one-dimensional rippling structures along the lengenbachite flake surface. The ripples are caused by the periodic mechanical strain generated between the alternating atomic layers. With the help of several optical spectroscopic techniques, the researchers found strong anisotropic optical properties in the flakes.
“We are thrilled to introduce this new type of natural anisotropic 2D material heterostructure into the existing 2D material library,” says Dr. Xiaodong Yang, an associate professor of mechanical and aerospace engineering at Missouri S&T and one of the authors of the research paper. “Further study of the anisotropic mechanical, electrical and magnetic properties of lengenbachite thin flakes may help fully establish this new material for integrated on-chip sensors and microelectromechanical systems.”
Source: By Nancy Bowles, Missouri S&T
podcast
We curated lists with the (what we think) best science and technology podcasts - check them out!