Journal of nanoscience and nanotechnology

(ISSN: 1533-4880)

Table of Contents

2021 - 21 (3)

  • Oxidation Kinetics of Cu Alloys Containing Alkaline Earth Metals at Low Temperature. 
  • Effects of Constituent Phases on Oxidation Kinetics of Al-Mg Alloys Containing a Trace of Ca. 
  • Combined Effect of Mg and Ca on Oxidation Behaviors of Zn-Mg Based Alloys Containing a Trace of Ca at High Temperature. 
  • Microstructure and Piezoelectric Properties of 0.97(Na, K, Li)(Nb, Sb, Ta)O₃-0.03(Bi, Na, Sr)ZrO₃ Ceramics Doped with Boron Oxide for Piezoelectric Actuator. 
  • Correlation of Surface Oxidation and Mg-Based Intermetallic Phases in Grain Boundaries of Al-Mg Alloys Containing Third Elements. 
  • Microstructure and Mechanical Properties of Commercially Pure Ti/Steel Joint Brazed by Zr-Ti-Ni Amorphous Filler Metal. 
  • Annealing Behaviors of Al and Al-Mg-Si Alloy: A Real-Time Synchrotron X-ray Scattering Study. 
  • Surface Analysis of Amorphous Carbon Thin Film for Etch Hard Mask. 
  • Effects of Mg Content on Electric and Mechanical Properties of Al-Zn-Cu Based Alloys. 
  • Characterization of Interfacial Microstructure of Cast Iron Inserts Dipping in Aluminum Alloy Melt. 
  • Influence of Si Content on Tensile Properties and Fractography of Al-Mg-Si Ternary Alloys. 
  • Comparison of Temperature Sensing Performance of 4H-SiC Schottky Barrier Diodes, Junction Barrier Schottky Diodes, and PiN Diodes. 
  • Nano-Crystallization Behavior and Optical Properties of Diopside: Eu₂O₃-Based Glass-Ceramic System. 
  • Effect of a High Mg Solute Content on the Hot Workability of Al-Mg Alloys. 
  • Microstructure, Electrical and Thermal Conductivity of the As-Extruded Al-xMM (Mischmetal) Based Alloys. 
  • Improvement of Figure of Merit Pb(Zr,Ti)O₃-Pb(Zn,Ni,Nb)O₃-Pb(In,Nb)O₃ Piezoelectric Ceramics. 
  • Enhanced Electrical Properties of AZO/IZO Multilayered Thin Film with Post Laser Annealing Process. 
  • Leakage Current Analysis Method for Metal Insulator Semiconductor Capacitors Through Low-Frequency Noise Measurement. 
  • Mechanical and Microstructural Evolution of the Mg-B Powder/Nb/Cu Cladding Using Hydrostatic Extrusion and Subsequent Drawing Process. 
  • Bend-Insensitive Discrimination of Strain and Temperature Based on Fiber Transmission Grating Inscribed on High Birefringence Photonic Crystal Fiber. 
  • Effect of Cu Addition on the Precipitation Hardening and Mechanical Properties of Al-Mg Based Cast Alloys. 
  • Study of Anti-Glare Pattern Forming Process by Glass Etching for Improved Image Quality. 
  • Pattern Visibility Enhancement by the Hybrimer Index-Matching Inter Layer in Oxide/Metal/Oxide-Structured Transparent Conductive Electrode on Flexible Polyethylene Terephthalate Substrates. 
  • Enhanced Energy Efficiency of Light Grid System with Optimized System Design and Recycling with Thermoelectric Platform. 
  • The Effect of Fe Addition on Microstructure, Mechanical Properties and Electric Conductivity of the As-Cast Al-Mg-Si Alloys. 
  • Investigation of Thermal Stability of 0.6/1 kV Metal-Coated Carbon Fiber Cable and Joint. 
  • Effect of Sacrificial AlN (Aluminum Nitride) Layer on the Deep Surface States of 4H-SiC. 
  • Metal-Organic Framework-Derived Ni-Co@C Catalysts for Urea Oxidation in Urea/H₂O₂ Fuel Cells. 
  • Improvement of Structural, Electrical, and Optical Properties of Sol-Gel-Derived Indium-Tin-Oxide Films by High Efficiency Microwave Irradiation. 
  • Numerical Investigation of Light Extraction Efficiency of GaN-based Vertical Blue Micron-Scale Light-Emitting Diode Structures. 
  • Reversible 100 mA Current Switching in a VO₂/Al₂O₃-Based Two-Terminal Device Using Focused Far-Infrared Laser Pulses. 
  • Characteristics of Cobalt Thin Films Deposited by Very High Frequency Plasma Enhanced Atomic Layer Deposition (60 and 100 MHz) Using Cobaltocene (Co(Cp)₂)/NH₃. 
  • Photoluminescence Properties of Nano-Sized BaO-TiO₂-SiO₂ System-Based Glass-Ceramics Doped with Er₂O₃ and Eu₂O₃. 
  • Predicting the Number of Graphene-Like Layers on Surface for Commercial Fumed Nanodiamonds with Raman Spectra and Model Calculations. 
  • Flexible Thin Carbon Nanotube Web Film for Curved Heating Elements Under High Temperature Conditions. 
  • Characterization of Perovskite Solar Cells According to TiO₂ Mesoporous Layer Treated with Ti-Diisopropoxide Bis. 
  • Characteristics of Aluminum-Doped Zinc Oxide Films Grown Using Facing Target Sputtering for Transparent Electrode of Heterojunction Solar Cells. 
  • Characteristics of Ultraviolet Sensor Based on PEDOT:PSS/Al Doped ZnO Film. 
  • Oxidation Behaviors of Aluminum Nanopowders with Different Particle Sizes: A Real-Time Synchrotron X-ray Scattering Study. 
  • Flexible Carbon Nanotube/Polydimethylsiloxane Composite for the De-Icing of Airplane Wings. 
  • Fabrication of Transparent Superhydrophobic Surface from ZnO Nanorods. 
  • Enhancement of the Retention Characteristics in Solution-Processed Ferroelectric Memory Transistor with Dual-Gate Structure. 
  • Self-Assembled Hybrid Gate Dielectrics for Ultralow Voltage of Organic Thin-Film Transistors. 
  • Investigation on the Electrical Stability of 5,11-Bis(triethylsilylethynyl)anthradithiophene Thin-Film Transistors. 
  • Electrical Properties of Amorphous Indium Zinc Tin Oxide Thin Film Transistor with Y₂O₃ Gate Dielectric. 
  • Synthesis and Characterization of PtCo Alloy Nanoparticles Supported on a Reduced Graphene Oxide/g-C₃N₄ Composite for Efficient Methanol Electro-Oxidation. 
  • Solar-Blind Photodetector with Lower Dark Current and Higher Ilight/Idark Ratio Based on Mg0.38Zn0.62O Film Deposited by Pulsed Laser Deposition Method. 
  • Improved Performance of All-Solid-State Flexible Supercapacitor Based on the Stress-Compensation Effect. 
  • Preparation, Characterization and Lithium Storage Performance of Agglomerated ZnMn₂O₄ Nanoparticles. 
  • Nanostructured Molybdenum Trioxide Layer on the Silver Anode of a Top-Incident Organic Photovoltaic Device. 
  • Iron Nitride Nanopowders Prepared by High-Pressure Gas-Solid Reaction. 
  • Photo-Electrochemical Water Splitting Behavior of Directionally Aligned CdSe Quantum Dots on Copper(II) Benzene-1,3,5-Tricarboxylate Metal-Organic Frameworks (MOFs). 
  • Improved Synthesis of Ag/SiO₂ Colloidal Nanocomposites and Their Antibacterial Activity Against Ralstonia solanacearum 15. 
  • Ni-Doped ZnO Thin Films: Deposition, Characterization and Photocatalytic Applications. 
  • Photocatalytic Degradation of Naphthol Green B Dye Using Coupled CdS-ZnMoO₄ in UV-A Light Irradiation. 
  • Electrospun Zn Doped CuFe₂O₄ Nanofibers with Enhanced Photo Fenton-Like Catalytic Activity. 
  • Ultrafast Microwave Synthesis of Carbon-Coated Lithium Vanadium Phosphate Cathode Material for Lithium Ion Batteries. 
  • Synthesis of Tin Oxide/Sponge Carbon Composite as Anode Material for Lithium-Ion Battery. 
  • Fabrication of Mesoporous C60/Carbon Hybrids with 3D Porous Structure for Energy Storage Applications. 
  • Synthesis of N-Doped Magnetic Mesoporous Carbon Composites for Adsorption of Ag(I) in Aqueous Solution. 
  • Establishment of Cattle Encephalon Glycoside and Ignotin Sustained-Release Drug Loading Nanostructured Lipid Carriers and Effect on the Repair Improving of Retinal Cells with Optic Nerve Injury. 
  • Preparation and In Vitro Evaluation of a Nano Ultrasound Contrast Agent Targeting Pancreatic Cancer. 
  • A Study on Carbon Capture and Storage and Its Feasibility in Energy-Environment Technologies. 
  • Simultaneous Measurement of Liquid Level and Temperature Using In-Fiber Grating-Based Mach-Zehnder Interferometer and Faraday Rotator Mirror. 
  • An Effective Method to Reduce Residual Lithium on LiNi0.8Co0.1Mn0.1O₂ Cathode Material Using a Reducing Agent. 
  • Magnesium Aminoclay (MgAC) as an Additive in Anti-Icing Mixture of Propylene Glycol Applied to Railway Electrical Wires: A Preliminary Study. 
  • A Leaky-Integrate-and-Fire Neuron Model of Spontaneous Reset of Thin-Film Metal-Oxide Resistive Switches. 
  • Preparation and Characterization of Planar-Type ZnO Powder with High Aspect Ratio for Application in Ultraviolet- and Heat-Shield Cosmetics. 
  • Strain-Insensitive Simultaneous Measurement of Bending and Temperature Using Long-Period Fiber Grating Inscribed on Double-Clad Fiber with CO₂ Laser. 
  • Quantized Convolutional Neural Network Implementation on a Parallel-Connected Memristor Crossbar Array for Edge AI Platforms. 
  • Highly Proton Conductive Sulfonyl Imide Based Polymer Blended from Poly(arylene ether sulfone) and Parmax-1200 for Fuel Cells. 
  • Nano-Crossbar Weighted Memristor-Based Convolution Neural Network Architecture for High-Performance Artificial Intelligence Applications. 
  • Development of a Constant Temperature Control Light Emitting Diode Light Cold Mask Reflecting Real-Time Skin Temperature Change. 
  • Smart Manufacturing Application in 3D FinFETs: New Approach for Performance-Yield Co-Optimization Based on Virtual Process Integration. 
  • The Fabrication of Polymethyl Methacrylate Nozzles for Electrohydrodynamic Printing. 
  • Hydrothermal Synthesis of Carbon Quantum Dots from Persimmons as Probe for Determination of Ferric Ions. 
  • Iron Oxide Nanomaterials for the Removal of Cr(VI) and Pb(II) from Contaminated River After Mariana Mining Disaster. 
  • Synthesis of Ethylenediaminetetraacetic Acid Disodium Salt Functionalized Magnetite/Chitosan Nanospheres for the Highly Efficient Removal of Methylene Blue. 
  • A Novel Room-Temperature Bonding Method Based on Electrohydrodynamic Printing. 
  • Microwave-Aided Exfoliation and Reduction of Graphene Oxide. 
  • Aqueous Oxytetracycline and Norfloxacin Sonocatalytic Degradation in the Presence of Peroxydisulfate with Multilayer Sheet-Like Zinc Oxide. 
  • Effect of Cerium Oxide Nanostructures on CO Oxidation. 
  • Fabrication of Sustained Release System of Electrospun Poly(acrylic acid)/Dextran Nanofibers Using Emulsion Electrospinning as Wound Dressing Applications. 
  • In-Vitro Study of Sol Gel Synthesized Bioactive Glass Ceramics for Anti-Microbial Properties. 
  • Modelling and Evolution of Conducting Filament in TiOx Memristor Using Conducting Atomic Force Microscopy. 
  • Investigation on the Effect of Hydroxyapatite Nanorod on Cement Hydration and Strength Development. 
  • Synthesis of Silica-Supported Hydroxamic Ligand for Removal of Metals Ions from Water. 
  • Preparation and Properties of CA/γ-Poly(glutamic acid)/ZnO Electrospun Membranes. 
  • Magnesium Hydrogen Phosphate: An Efficient Catalyst for Acrylic Acid Production from Biorenewable Lactic Acid. 
  • Graphene Oxide and Graphene Oxide-TiO₂ Nanocomposites: Synthesis, Characterization, and Rhodamine B Photodegradation Investigation. 
  • FeS₂ Loaded Porous SiO₂ Ball as a Tweezers Recoverable Heterogeneous Fenton Catalyst with Enhanced Recyclability. 
  • Cytotoxicity of Methotrexate Conjugated to Glycerol Phosphate Modified Superparamagnetic Iron Oxide Nanoparticles. 
  • Evaluation of Minimally Invasive Arthroscopy Technology in Sports Medicine-An Evaluation of Nano Silver Disinfectants. 
  • Facile Preparation of Activated Carbon from Peanut Shell for Determination of Bisphenol A in Human Urine by High-Performance Liquid Chromatography. 
  • Interaction of Humic Acid with Graphene Oxide: Relation to Antibacterial Activities Against Escherichia coli. 
  • Molybdenum Dioxide (MoS₂)/Gadolinium (Gd) Containing Arginine-Glycine-Aspartic Acid (RGD) Sequences as New Nano-Contrast Agent for Cancer Magnetic Resonance Imaging (MRI). 
 
 

Journal Information