Journal of nanoscience and nanotechnology

(ISSN: 1533-4880)

Table of Contents

2018 - 18 (3)

  • Multi c-BN Coatings by r.f Diode Sputtering and Investigation of Wear Behavior. 
  • Pore Characteristics of Lotus-Type Porous Cu-Fe and Cu-Cr Alloys Fabricated by Unidirectional Solidification. 
  • Effect of Inductively Coupled Plasma on the Properties of Nanocrystalline Vanadium Nitride Films for Corrosion Resistant Surface. 
  • Ductile Crack Initiation Criterion with Mismatched Weld Joints Under Dynamic Loading Conditions. 
  • Removal of Humic Acid in Water Using Novel Nanomaterials. 
  • Adsorption Behavior of Recyclable Magnetites with N-Components for Adsorption of Copper Ion. 
  • Tailored Pt/TiO₂ Photocatalyst with Controllable Phase Prepared via a Modified Sol-Gel Process for Dye Degradation. 
  • Effect of Deposition Height on Nanostructure of Tungsten Oxide Thin Films in Flame Vapor Deposition Process. 
  • Effect of Zn on Pore Characteristics in Lotus-Type Porous Cu. 
  • Evaluation of Acid Etching on Surface Characteristics, Strength and Biological Response of Glass-Infiltrated Zirconia. 
  • Nanosized-Particle Dispersion-Strengthened Al Matrix Composites Fabricated by the Double Mechanical Alloying Process. 
  • Soluble and Nanoporous Silica Gel-Entrapped C. freundii Methionine γ-Lyase. 
  • Addition of a Second Metal (Co) to Molybdenum Carbide: Effect of the Doping Route. 
  • Nano Precipitation and Hardening of Die-Quenched 6061 Aluminum Alloy. 
  • Nanostructured Biomass Based Carbon Materials from Beer Lees for Hydrogen Storage. 
  • The Effects of Dy Addition on Microstructure and Mechanical Properties of the As-Cast Mg-5Al-3Ca-2Nd Alloys. 
  • Effects of Mg Addition with Natural Aging Time on Two-Step Aging Behavior in Al-Mg-Si Alloys. 
  • NO₂ Gas Sensing Properties of Nano-Sized WO₃ Powders Prepared by a Polyvinyl Alcohol Solution Route. 
  • Facile Synthesis and Characterization of Zinc Oxide Nanoparticle on Activated Carbon Using Liquid Phase Plasma Method. 
  • Effect of Intermetallic Compound Formation in Friction Welded Al Alloy Rods. 
  • Bandgap Tunability of Transition Metal Dichalcogenide Atomic Layers. 
  • Synthesis and Electroluminescent Properties of New Dibenzo-Diazocine Derivatives. 
  • Synthesis and Electroluminescence Properties of New Dual-Core Derivatives. 
  • Synthesis and Electroluminescence Properties of New Type Multi-Chromophore Emitting Materials for Organic Light-Emitting Diodes. 
  • Fabrication of Up-Conversion Phosphor Films on Flexible Substrates Using a Nanostructured Organo-Silicon. 
  • Wear Resistance Properties Reinforcement Using Nano-Al/Cu Composite Coating in Sliding Bearing Maintenance. 
  • Quantitative Image Analysis of Carbon Nanostructure of Particles Produced from Combustion Process. 
  • Hot Deformation Behavior of Hot-Extruded AA7175 Through Hot Torsion Tests. 
  • Role of the Growth Temperature in MoS₂ Growth by Chemical Vapor Deposition. 
  • Effects of Fragmented Fe Intermetallic Compounds on Ductility in Al-Si-Mg Alloys. 
  • Development of Nanofiber Reinforced Double Layered Cabin Air Filter Using Novel Upward Mass Production Electrospinning Set Up. 
  • Carbon Nanostructure of Diesel Soot Particles Emitted from 2 and 4 Stroke Marine Engines Burning Different Fuels. 
  • NH₄OH-Oriented and pH-Dependent Growth of ZnO Nanostructures via Microwave-Assisted Growth Method. 
  • Effects of Intermetallic Compound Formation in Al/Cu Clad Material Fabricated by Differential Speed Rolling. 
  • AuAg Bimetallic Non-Alloyed Nanoparticles on SiO₂ Spacer Layer for Improved Light Absorption in Thin-Film c-Si Solar Cells. 
  • Environmental Applications of Nano-Sized Recycled Aggregates: The Effect of Sterilization and Adsorption. 
  • Preparation of Nanoscale Zinc Oxide-Laponite Composites by Polyvinyl Alcohol Polymerization and Usability for Removal of Trichloroethylene in Water. 
  • Characterization of Pulse Reverses Electroforming on Hard Gold Coating. 
  • Oxidation and Tribological Behavior of Ti-B-C-N-Si Nanocomposite Films Deposited by Pulsed Unbalanced Magnetron Sputtering. 
  • Probing an Individual Electron Spin State in a Quantum Dot with Spin Bias. 
  • Cost-Effective Fabrication of Inner-Porous Micro/Nano Carbon Structures. 
  • Conductance Measurement of Pyrazine Molecular Junction with Cu and Ag Electrodes. 
  • Effect of UVB Light Exposure on Tensile Behavior of Carbon Nanotube Sheet. 
  • Templated Growth of Pd Nanoparticles Using Sputtering Deposition Process and Its Catalytic Activities. 
  • Investigate on Structure and Optical Properties of ZnO Nanostructures Grown on a-GaN/r-Sapphire. 
  • In Situ Template-Synthesis of Hollow CeO₂ Nanobeads in scCO₂ with Improved Catalytic Activity Towards CO Oxidation. 
  • Study on Microstructure and Mechanical Properties of Al-Li Based Alloys Processed by Extrusion. 
  • A Simulated Body Fluid Evaluation of TiO₂ Barrier Oxide Layer Formed by Electrochemical Reaction. 
  • Investigation of Gate-Stacked In-Ga-Zn-O TFTs with Ga-Zn-O Source/Drain Electrodes by Atmospheric Pressure Plasma-Enhanced Chemical Vapor Deposition. 
  • Preparation and Properties of WC-Based Alloy Coatings with Controlled Co and Cr via High Velocity Oxy-Fuel Spray Technique. 
  • Cavitation Erosion Behavior of Electroless Ni-P Coating and Optimization of Process Parameter Using Analysis of Variance with Orthogonal Array. 
  • High-Speed Growth of ZnO Nanorods in Preheating Condition Using Microwave-Assisted Growth Method. 
  • Surface Roughness of a 3D-Printed Ni-Cr Alloy Produced by Selective Laser Melting: Effect of Process Parameters. 
  • Visible Light Photocatalytic Performance of In Situ Synthesized Graphite-SiO₂-TiO₂ Composite Towards Degradation of Benzene Gas. 
  • Dimerization of Ethylene to Butenes Over Ordered Mesoporous Silica SBA-15 Supported Ni-Al Catalysts with Different Morphologies. 
  • Characteristics of the Li-Ni Doped Cobalt Oxide Thin Films Prepared by Pulsed Laser Deposition. 
  • Exciton Formation Entropy Changes in Transition Metal Dichalcogenide Atomic Layers. 
  • Study on Strain Compensation for Multiple-Quantum Well in Infrared Light-Emitting Diode Using the InxGa1-xP Strain Barrier. 
  • Up-Conversion Luminescence Properties of LaGaO₃:Yb3+, Er3+ Phosphors. 
  • UV Photoluminescence of Alumino-Germano-Silicate Glass Optical Fiber Incorporated with Gd₂O₃ Nano-Particles Upon Illumination of Xenon-Lamp. 
  • Synthesis of Nanoscale Fully Stabilized Zirconia Powders by Urea Hydrolysis, Sintering and Electrical Characterization. 
  • Rapid Macroscopic-Scale Assembly of Ag Nanowires at the Water/Air Interface. 
  • Characterization of DDAB/Cholesterol Vesicles and Its Comparison with Lipid/Cholesterol Vesicles. 
  • Fabrication of TiO₂ Nanostructures on Ti₃SiC₂ Substrate by Anodic Oxidation. 
  • Study on Surface and Crystallinity of TiO₂ Microspheres as the Photoanode of Dye-Sensitized Solar Cells. 
  • Two Methods for Intercalation of Surfactants into Graphite Oxide. 
  • 3D MnCo₂O4.5 Nanorod Arrays on Ni Foam as Binder-Free Anodes for Li-Ion Batteries. 
  • Preparation of CaCO₃ and CaO Nanoparticles via Solid-State Conversion of Calcium Oleate Precursor. 
  • Grain Refinement of Al-Si-Fe-Cu-Zn-Mn Based Alloy by Al-Ti-B Alloy and Its Effect on Mechanical Properties. 
  • Characteristics of Nano Grained AA1050/AA5052 Al Sheets Fabricated by Accumulative Roll-Bonding. 
  • Effects of the Grain Boundary and Interface Traps on the Electrical Characteristics of 3D NAND Flash Memory Devices. 
  • Effect of Self-Heating on the Electrical Characteristics of Strained Si FinFETs. 
  • The Effect of Tool Profiles on Mechanical Properties of Friction Stir Welded Al5052 T-Joints. 
  • Effect of the Spray Distance on the Properties of High Velocity Oxygen-Fuel (HVOF) Sprayed WC-12Co Coatings. 
  • Fabrication of Si Micro Mold via Tribo-Nanolithography Using Micro Polycrystalline Diamond Cantilever Tool. 
  • High Temperature Corrosion of TiAlCrSiN Films in N₂/0.1%H₂S Gas. 
  • Using KrF ELA to Improve Gate-Stacked LaAlO₃/ZrO₂ Indium Gallium Zinc Oxide Thin-Film Transistors with Novel Atmospheric Pressure Plasma-Enhanced Chemical Vapor Deposition Technique. 
  • Optical Characteristics of Double Layered Plasmonic Structure Using Nanopatterning Process. 
  • Improved Heat Dissipation of High-Power LED Lighting by a Lens Plate with Thermally-Conductive Plastics. 
  • Near-Infrared to Visible Up-Conversion Luminescence Characteristics of Er, Yb Co-Doped LaVO₄ Phosphors. 
  • The Effect of Precursor Composition on the Structural Properties of Nanocrystalline Diamond Films. 
  • Fabrication and Friction Coefficient of Graphene Oxide Reinforced Hydroxyapatite Composite. 
  • Microstructure and Electrochemical Performance of Co₃O₄ Nanopillars Calcinated at Various Temperatures. 
  • A Sensor Based on LiCl/NaA Zeolite Composites for Effective Humidity Sensing. 
  • Broadband UV Excited LaF₃:Eu3+ Based Inorganic-Organic Mixed Hybrid Nanoparticles for Strong Luminescence. 
  • Preparation and Performance of Porous Polymer Electrolytes Doped with Nano-Al₂O₃. 
  • A Phosphine-Free Route to Size-Adjustable CdSe and CdSe/CdS Core-Shell Quantum Dots for White-Light-Emitting Diodes. 
  • Investigating the Role of Substrate Tin Diffusion on Hematite Based Photoelectrochemical Water Splitting System. 
  • Evolution of Nanostructure Through Thickness of Deoxidized Low-Phosphorous Copper by Three-Layer Stack Accumulative Roll-Bonding. 
  • Effects of Heat Treatment on Interfacial Behavior and Bonding Strength of Surface Activated Bonding Ti-Al Laminate. 
  • Interface State Density and Series Resistance of n-Type Nanocrystalline FeSi₂/p-Type Si Heterojunctions Formed by Utilizing Facing-Target Direct-Current Sputtering. 
  • Effect of the Curved Fin Top Edge on the Electrical Characteristics of FinFETs. 
  • Temperature Dependence of Oxide Semiconductor and Channel Effect of Thin Film Transistor. 
  • Growth of Large-Area 2D MoS₂ Arrays at Pre-Defined Locations Using Stencil Mask Lithography. 
  • Pyrolysis Mechanism of Ionic Liquid Under Microwave Irradiation and the Formation of N-Doped Carbon. 
  • Preparation of Partially Unzipped Carbon Nanotube/Ag (PUCNTs/Ag) Nanocomposite and Its Application for H₂O₂ Based Non-Enzymatic Sensor. 
  • Enhanced Specific Capacitance of Few-Layer MoS₂ Nanosheets via SDBS-Assisted Hydrothermal Method. 
  • How Does Amino Acid Ligand Modulate Au Core Structure and Characteristics in Peptide Coated Au Nanocluster? 
  • Study on Sand Erosion and Tribological Behavior of TiO₂ Films Prepared on a Glass Surface. 
  • Evaluation of Weldability for MAG and LASER with Galvannealed Steel. 
  • Development of a Spoke Type Torque Sensor Using Painting Carbon Nanotube Strain Sensors. 
  • The Effect of Au/Ag Bimetallic Thin-Films on Surface Plasmon Resonance Properties Comparing with Those of Au and Ag Single Thin-Films. 
  • Numerical Analysis of the Temperature Impact on Performance of GaN-Based 460-nm Light-Emitting Diode. 
  • Tuneable Physicochemical Properties of Thermally Annealed Graphene Oxide Powder and Thin Films. 
  • A Facile Photoluminescent Probe for Picric Acid Detection Using Carbon Nanodots Prepared by Sichuan Bergamot. 
  • Fabrication of ACF/GO/PEI Composite for Adsorption of Methyl Orange from Aqueous Solution. 
  • Self-Powered Sensors and Flexible Triboelectric Nanogenerator for Powering Portable Electronics. 
  • Forced Convective Heat Transfer of Aqueous Al₂O₃ Nanofluid Through Shell and Tube Heat Exchanger. 
  • Studies on Conducting Polymer Blends: Synthesis and Characterizations of PVA/PVP Doped with CaCl₂. 
  • Synthesis, Spectral and Photophysical Properties of Anthracene Substituted Phthalocyanines; A Study as Polyurethane Electrospun Nanofibers. 
  • A Self-Assembly Fluorescence Sensing Platform for Glutathione Detection Based on Eco-Friendly Quantum Dots and MnO₂ Nanosheets. 
  • Redistribution of Welding Residual Stresses of Crack Tip Opening Displacement Specimen by Local Compression. 
  • Preparation and Visible-Light Driven Photocatalytic Properties of CuS/Reduced Graphene Oxide Composites. 
  • Nanoscale Characterization of Growth of Secondary Phases in Off-Stoichiometric CZTS Thin Films. 
  • Fabrication of Pd-Pt/ZnO for High Sensitive Gaseous Formaldehyde Sensor. 
  • Persistent Methyl Orange Degradation Ability of MgAl₂O₄:(Pr3+,Dy3+)/M-TiO₂ Luminescent Photocatalyst. 
  • Effect of Colloidal Medium on the Shelf-Life and Stability of Gold Nanorods Prepared by Seed-Mediated Synthesis. 
  • Nanocomposite Membranes Comprising Crosslinked Polymer Blends of Poly(vinyl alcohol)/Poly(styrene sulfonic acid-co-maleic acid) and Fumed Silica Nanoparticles. 
  • Characterization of Lateral Structure of the p-i-n Diode for Thin-Film Silicon Solar Cell. 
  • Impact of Isolation and Immobilization Layers on the Electro-Mechanical Response of Piezoresistive Nano Cantilever Sensors. 
  • Temperature Dependent Electron Transport Properties of Gold Nanoparticles and Composites: Scanning Tunneling Spectroscopy Investigations. 
  • Delivery of Abscisic Acid to Plants Using Glutathione Responsive Mesoporous Silica Nanoparticles. 
  • Characteristics of Sodium Polyacrylate/Nano-Sized Carbon Hydrogel for Biomedical Patch. 
  • Fabrication of Polydopamine Coating and Its Application in Glucose Sensor. 
  • Surface Plasmon Resonance Aptamer Biosensor for Discriminating Pathogenic Bacteria Vibrio parahaemolyticus. 
  • Comparison of the Off-Target Effects Among One-Base to Three-Base Mismatched Targets of gRNA Using a Blue to White Assay. 
  • Copolymeric Micelles Loading Curcumin: Preparation, Characterization and In Vitro Evaluation. 
  • MPEG-CS/Bmi-1RNAi Nanoparticles Synthesis and Its Targeted Inhibition Effect on CD133+ Laryngeal Stem Cells. 
  • Effects of CdSe and CdSe/ZnS Core/Shell Quantum Dots on Singlet Oxygen Production and Cell Toxicity. 
  • Dynamic and Depth Dependent Nanomechanical Properties of Dorsal Ruffles in Live Cells and Biopolymeric Hydrogels. 
  • Synthesis and Characterization of Calcium Phosphate Ceramic/(Poly(vinyl alcohol)-Polycaprolactone) Bilayer Nanocomposites-A Bone Tissue Regeneration Scaffold. 
  • Functionalized Magnetic PLGA Nanospheres for Targeting and Bioimaging of Breast Cancer. 
  • Polysaccharide Functionalized Single Walled Carbon Nanotubes as Nanocarriers for Delivery of Curcumin in Lung Cancer Cells. 
  • Scaffolds Based on Collagen, Hyaluronan and Sericin with Potential Applications as Controlled Drug Delivery System. 
  • Aptamers-Based Sensing Strategy for 17β-Estradiol Through Fluorescence Resonance Energy Transfer Between Oppositely Charged CdTe Quantum Dots and Gold Nanoparticles. 
 
 

Journal Information