Researchers 3D Print Large-Scale Objects with Newly Developed Type of Cellulose

IMTS

Share this Article

Cellulose is the most abundant organic compound on Earth, and researchers have been working on ways to 3D print it and take advantage of its ready availability. There are still plenty of issues that restrict the practical applications of 3D printed cellulose, however, including lack of scalability, high production cost and derivatives that cause pollution when used in combination with plastics. But recently researchers from the Singapore University of Technology and Design (SUTD) have developed a sustainable way to not only 3D print with cellulose, but to 3D print large objects with it.

Cellulose makes up the rigid walls of green plants, but the SUTD researchers looked elsewhere, taking inspiration from the walls of fungus-like oomycetes, which are reproduced by introducing small amounts of chitin between cellulose fibers. The resulting fungal-like adhesive materials (FLAM) are strong, inexpensive and lightweight, and can be processed using woodworking techniques.

1.2m, 5.2kg turbine blade fabricated entirely with cellulose and chitosan, the most ubiquitous biopolymers on earth and produced in large amounts in almost every ecosystem. Both ingredients are obtained from by-products of the industry, resulting in production with negative ecological footprint.

No organic solvents or synthetic plastics are used to manufacture the material, making it fully environmentally friendly. The scalable, reproducable material is also biodegradable in outdoor composting facilities and other natural conditions. It’s affordable, too – FLAM is about the same cost as commodity plastics and is 10 times cheaper than common plastic filaments like ABS and PLA. The researchers have also developed an additive manufacturing technique specific to FLAM.

“We believe this first large-scale additive manufacturing process with the most ubiquitous biological polymers on earth will be the catalyst for the transition to environmentally benign and circular manufacturing models, where materials are produced, used, and degraded in closed regional systems,” said SUTD Assistant Professor Javier Gomez Fernandez, co-lead of the project. “This reproduction and manufacturing with the material composition found in the oomycete wall, namely unmodified cellulose, small amounts of chitosan — the second most abundant organic molecule on earth — and low concentrated acetic acid, is probably one of the most successful technological achievements in the field of bioinspired materials.”

The research was published in a paper entitled “Large-scale additive manufacturing with bioinspired cellulosic materials,” which you can access here.

“We believe the results reported here represent a turning point for global manufacturing with broader impact on multiple areas ranging from material science, environmental engineering, automation and the economy,” said Assistant Professor and project co-lead Stylianos Dritsas. “So far we have been focusing on fundamental technology development, and little time has been invested in specific target applications. We are now at the stage of seeking industrial collaborators to bring this technology from the laboratory to the world.”

The SUTD researchers are developing FLAM in response to a growing need for more sustainable manufacturing materials, and it’s a promising material, requiring no forest resources or cropland. 3D printing, like manufacturing as a whole, has been in dire need of more environmentally friendly 3D printing materials, and the SUTD team believes that FLAM could be the answer. The fact that the strong, lightweight material has lent itself so well to 3D printing large-scale structures is especially encouraging.

Authors of the paper include Naresh D. Sanandiya, Yadunund Vijay, Marina Dimopoulou, Stylianos Dritsas and Javier G. Fernandez.

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

[Source: Science Daily / Images: SUTD]

 

Share this Article


Recent News

3D Printing Financials: Velo3D Struggles in Harrowing 2023 Earnings Report

Time Travelers’ Relics: 5 Spectacular 3D Printed Artifacts that Bring History to Life



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Webinar and Event Roundup: March 17, 2024

It’s another busy week of webinars and events, including SALMED 2024 and AM Forum in Berlin. Stratasys continues its in-person training and is offering two webinars, ASTM is holding a...

HP Releases New Arkema Sustainable 3D Printing Polymer Ahead of AMUG 2024

Ahead of the Additive Manufacturing Users Group (AMUG) Conference in Chicago next week (March 10-14), HP Inc. (NYSE: HPQ) has announced a new sustainable polymer offering, PA 12 S, for...

3D Printing Financials: Materialise Reports Growth in 2023 with Medical Segment Success

Closing out 2023, Materialise (Nasdaq: MTLS) unveiled a strong financial performance for its fourth quarter. The Belgium-based company reported a revenue increase of 4.1% year-over-year, and despite facing net losses,...

3D Printing Webinar and Event Roundup: February 25, 2024

It’s another busy week of webinars and events in the AM industry, including Silicone Expo Europe in Amsterdam, an open house for Massivit in North America, and the AM for...