Useful Polymers That Fade Away

Rapid-fire developments in polymer technology are creating breakthroughs in medical design that can build billion-dollar markets overnight-as already seen in the explosive recent growth of the drug-eluting stent business. The next big thing in medical design is implanted devices made of biodegradable (also called bioabsorbable or resorbable) plastic compounds.

The use of biodegradable polymers in orthopedics dates backs to the 1980s, but various metals, particularly titanium, have dominated due to their superior strength and because of problems related to biodegradables, particularly tissue reaction caused by rapid bulk erosion of the polymer. Significant technology advances in polymer engineering are about to unleash a new wave of design developments for the melt-away matter.

Key design developments to watch:

Introduction of new coronary stents that use biodegradable materials for coatings or for the entire structure. Biodegradables have the potential to revolutionize the $5 billion annual stent market almost overnight because they create opportunities for retreatment and elimination of drug residues used to treat restinosis, or renarrowing of the artery.

Development of new site-specific drug delivery devices that treat cancer, wounds or macular degeneration and then disappear.

Rapid conversion of fracture fixation devices, such as screws, pins, plates or mesh from metals (titanium, stainless steel or cobalt chrome) to new biodegradable fixtures that are stronger and break down on pre-determined schedules.

A new Frost & Sullivan research report predicts than use of biodegradable materials for implants will grow 7.5% a year compared to 2.4% for all materials used in implants. "Bioabsorbable polymers are being clinically researched by many implant manufacturers to use in cardiovascular stents, meshes, spinal fusion as well as hip and knee transplants," comments Balaji B. Capaloor, senior research analyst at Frost & Sullivan.

Biodegradables are rapidly gaining favor in orthopedics with doctors and patients because no follow-up surgery is required to remove them. They also allow transfer of loads to healing bone and soft tissues, are compatible with magnetic resonance imaging and avoid complications, such as corrosion, sometimes associated with metal implants. Another advantage of biodegradables is that injection molders are now mass producing the very expensive and thermally unstable polymers. These molders include Phillips Plastics of Hudson, WI, and Mar-Lee Industries of Fitchburg, MA.

Only a small number of monomers have been accepted for use in approved medical orthopedic devices. These include polylactic acid (PLA), polygolic acid (PGA), polycaprolactone (PCL), polydoxanone (PDO) and poly trimethylene carbonate (TMC). Creation of copolymers from these monomers greatly extends engineering opportunities. For example, TMC makes compounds tougher and more malleable. Even within the PLA family, several combinations are possible.

A key question for engineers to consider is the extent of crystallinity in the polymer structure. Polymers, such as PGA, with semi-crystalline structures are better suited for load-bearing applications because they have better mechanical strength. Mechanical properties of the polymers can be boosted by increasing their level of crystallinity.

One of the leading orthopedic technology developers is a Finnish-based company called Inion, which is only six years old. Its products include biodegradable polymer plates that are used for hand, ankle and dental repair. The material retains load-bearing strength for about 12 weeks and then weakens, allowing the repaired bone to gradually adapt to bearing loads. "Typically, the material will break down over the next 18 to 24 months," comments Auvo Kakkinen, CEO of Inion and a former orthopedic surgeon. "The process is harmless and the resulting energy is absorbed into the body's cells."

A British company called Smith & Nephew last year launched a system using bioabsorbable screws to attach graft tissue in anterior cruciate ligament surgery. The tapered fixation screw is injection molded from poly-l-lactic acid (PLLA).

Disappearing Devices

The next phase of technology development focuses on use of bioabsorbable polymers in devices that are implanted in the human body using newly engineered polymers that have highly tailored degradation schedules.

The New Jersey Center for Biomaterials, headed by Rutgers professor Joachim Kohn, has engineered new polymer structures for use by device makers Reva Medical in San Diego and SurModics of Eden Prairie, MN. Reva asked Kohn to develop a polymer it could use in its slide-and-lock coronary stent, which uses a mechanical system to expand within a coronary artery. A series of stent elements slide open and then lock into place. The design is said to allow for substantial reductions in stent strut thickness in a variety of materials, including bioresorbable polymers. In previous stent designs, a surgeon expands a balloon inside the stent when an X-ray indicates the stent is in place. The balloon bends and deforms the metal structure, which is often covered with a durable polymer that distributes drugs to the diseased area.

"The bioresorbable device is currently in the development stage, comments Cheryl Liberatore, director of business development for Reva. "The preclinical work is substantially complete and the company is poised for a first-in-man clinical trial in the near term."

Dr. Kohn developed an enhanced version of poly(DTE carbonate) for use in the Reva stent. His experiments included addition of iodine to allow X-ray visibility, poly(ethylene glycol) to make the material less adhesive to components and avoid clotting, and acidic comonomer to fine tune biodegradation schedules. His team at Rutgers used computer models, a new screening assay and other tools to determine optimal quantities of each new ingredient.

Boston Scientific, one of the two leading stent manufacturers, has an option to buy Reva. Some clinicians believe that using bioabsorbable polymers will allow stents to treat more lesions per patient than metallic stents or to treat different vascular diseases where metal stents are not as desirable. CEO James R.Tobin of Boston Scientific commented at a plastics conference last year, however, that use of stents to treat other vascular diseases is still well done the road.

Another important player is MediVas, also of San Diego, which uses amino acid-based-poly(ester amides) , or PEA, to make bioabsorbable stents. MediVas has agreements with several technology players in the coronary stent market, including Boston Scientific, and is also studying bioabsorbable devices that can be attached to cancer tumor cells or backs of eyes, where they would dispense medications and then disappear.

Also on the horizon are bioasborbable polymer scaffolds that can be seeded with human stem cells and placed in specific locations to repair arteries or other damaged human tissue. Standard Biofelt, made by Concordia Fibers, Coventry, RI, is produced from PGA in 20 cm by 30 cm felts. The thicknesses can be specified from 1 to 5 mm and the bulk density from 25 to 100 mg/cc. Concordia Fibers' work in tissue engineering is based on the work of Dr. Robert Langer at the Massachusetts Institute of Technology. (See "Medical Miracles", Aug.15, 2005 at www.designnews.com.)

"All applications of Biofelt are currently in pre-clinical and animal trial stages, but we do expect that some of these will reach human clinical trials in the next couple of years, comments Art Burghouwt (sp), executive vice president of Concordia Fibers. "The cell seeding, proliferation, and differentiation is more the issue than the behavior of the polymers and scaffolds"

Bioabsorbable Polymer Links

Materials developers

The New Jersey Center for Biomaterials: http://www.njbiomaterials.org/
Purac America: http://www.purac.com/
Polymer Technology Group: http://www.polymertech.com/

Absorbable Polymer Technology: http://www.durect.com/

Device Developers

Medivas: http://www.medivas.com/
Reva Medical: http://www.teamreva.com/
SurModics: http://www.surmodics.com/home.aspx
Inion: http://www.inion.com/
Smith & Nephew: http://www.smith-nephew.com/

Molders

Phillips Plastics: http://www.phillipsplastics.com/
Mar-Lee Industries: http://www.mar-leecompanies.com/