Home » Markets » Industrial Electronics

Industrial Electronics

Electronics related to industrial applications

1kW harsh environment PSU sealed to IP65

PowerBox-ECD1000A-1kW-acdc-psu

Powerbox is aiming at ground-based defense applications and harsh industrial environments with a 1,000W IP65 ruggedised ac-dc power supply series. ECD1000A comes in a metal enclosure with baseplate conduction cooling and can be used with the plate from -40 to +75°C, derated in some situations. Operation is from 85 to 305Vac (100 to 277Vac nominal) and output is 28Vdc 36A. ...

Sony enables Camera Remote Command through ISO-PTP

Sony-sdk_v1.12_detail-261x200.jpg

Sony has publicly released its “Camera Remote Command”, a list of commands enabling developers to remote control any of 29 Sony cameras. This removes restrictions to third party software to remotely control aspects of shooting, monitoring, and file transfer in Sony cameras, highlighted the company. Camera Remote Command Possible applications for Camera Remote Command include 3D image scanning (automating the ...

Remote head torque sensors are accurate to ±0.1%

Sensor Technology Torque sensor with separate head

Sensor Technology has torque sensor accurate to ±0.1% of full-scale, that has its sensing head and electronics in separate housings. “This has two advantages,” according to the company. “The sensing head can fit into confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture and electromagnetic forces.” Dubbed SGR530 ...

Atom x7000RE on VME

Concurrent VME RHEA block

  Concurrent Technologies has put Intel Atom x7000RE Amston Lake processors into a VME board, adding image processing and AI audio processing accelerators to the venerable form factor. CPU choice on the board, called Rhea, is either the four-core 1.5GHz x7433RE, or the two-core 2GHz x7213RE. “Whilst no longer the cutting edge of technology, VME continues to be a widely ...

Embedded World: Atom x7000RE SMARC processor modules for industry

conga-SA8-Amston-Lake

Congatec announced SMARC modules based on Intel’s Atom x7000RE ‘Amston Lake’ processors. “Specially designed for industrial requirements, they deliver eight processor cores, double the previous generation, while maintaining the same power consumption,” according  to Congatec. Called conga‑SA8, the modules are credit card size and operate over -40 to +85°C. Read all the latest news from Embedded World 2024 » AI ...

Embedded World: Atom x7000RE edge AI servers

Supermicro edge computers intel Atom

Supermicro has announced edge computers built around Intel’s Atom x7000RE processors. SYS-E100-14AM and SYS-E102-14AM mini-PCs have up to eight ‘Efficient’ cores had dissipate less than 12W. “While the SYS-E102 comes in a form factor of only 190 x 44 x 120 mm, these systems offer up to 16GB of DDR5-SODIMM, dual 2.5 GbE LAN ports, two independent HDMI ports, three ...

NXP reveals MCX MCUs with Matter, Thread, Zigbee and Bluetooth LE

NXP MCX W72x wireless mcu block

NXP has finally revealed the wireless versions of its MCX microcontrollers, first announced in mid-2022. “Featuring the industry’s first MCU with Bluetooth Channel Sounding, NXP’s MCX W series enables edge devices with secure multi-protocol wireless for Matter, Thread, Zigbee and Bluetooth Low Energy,” according to the company, which explained: “Bluetooth Channel Sounding standard improves the accuracy and security of distance ...

Integrated processors accelerate Ethernet adoption in factory automation

Texas-1-300x200.jpg

Ethernet-based industrial communications is not a far-off, unattainable vision of factory and process automation. It is being adopted at a rapid pace, says Vaibhav Desai. The cost, complexity and scalability challenges of Ethernet-based communications mean that serial interfaces are still the standard for wired communications. This is understandable, given the cost-effectiveness and reliability of IO-Link and RS-485. Design and software ...

80V symmetric dual n-channel mosfet in 3 x 3mm

Vishay SiZF4800LDT dual mosfet cct

New Yorker Electronics is aiming at displacing PowerPAK 1212 packaged mosfets by stocking a pair of symmetric 80V n-channel mosfets in a single 3.3 x 3.3mm package from Vishay. Called SiZF4800LDT, the “device provides designers with a space-saving solution for synchronous buck converters, point-of-load converters, and half-bridge and full-bridge power stages,” according to New Yorker. “In these applications, the high ...

Surface-mount industrial M12 connectors

binder surface mount M12 connectors 692

Binder has announced surface-mount M12 circular connectors. “They are suitable for processing in fully automated processes, such as for the particularly dense, double-sided assembly of PCBs,” it said. They are available “in blister or tape and reel packaging for automated processing”. Versions with 4, 6 and 8 contacts and with different codings are being offered, in both shielded and unshielded ...